The manual of 4HP14 A/T removing and installing
CHERY AUTOMOBILE CO., LTD
Assembling the whole clutch E assembly.
Install diaphragm spring 02 142 first, and
then install outer teeth sheet steel 02 120 and
friction plate 02 130 alternately.
Install retainer ring 02 140, and fix with snap
ring 01 150.
NOTE:
Adjust as per procedures in section 1.4.3 page
5/8.
Install two snap rings 02 030 and 02 032 onto
worm rod 02 020, and make the two snap
rings interlocked.
Appling lubricating before install O-ring 02
040 onto the worm rod.
-96-