Chery A11 2003 Repair Manual page 515

CHERY AUTOMOBILE CO., LTD
2.Plu
g in the carrier rod of
brake band C'. Install the
adjusting bolt, washer and
adjusting nut.
adjusting bolt is screwed in
by half.
N ote:
Two disk washers have
be assembled so that the sunk
si de faces each
Otherwise, it will influence the
br ake's working.
3 .Put the two disk washers on
the piston's push rod. The
thicker one is close to th
shaft shoul der.
4.
Put a new O-ring on piston
C'. Then put piston C' on the
piston push rod and fix it
with a snap ring.
The
other.
e
Automatic Transmission Fault Diagnosis Manual
83