Chery A11 2003 Repair Manual page 411

The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Install safety ring 17 190 (tooth type of thin steel
ring) and grooved nut 17 200, and tighten
grooved nut with socket spanner 5×46 000 155.
Torque：50Nm
As shown on figure, using appropriate drift, tamp
tooth ring into groove on grooved nut, enhancing
locking.
Turn over housing by 90 ℃ , check clutch
operating condition. Clockwise turn clutch,
confirm clutch can turn smoothly.
Assembling brake D assembly. Install sheet steel
17 050 first, and then install friction plate 17 060,
alternately install, and install retainer ring 17 070,
and then fix with the snap ring 17 080.
-79-