Chery A11 2003 Repair Manual page 540

CHERY AUTOMOBILE CO., LTD
4. Press the clutch's outer racer on the one-way overrun clutch drum;
5. Install the snap ring and retaining ring with the special t
6. Press fit the tapered roller
bearing on the output sh
with the special tool of
KA-000-300.
7. Connect the output shaft with
the gear ring;
8. Install the snap ring on the output
shaft;
9. Install the output
one-way overrun clutch into the
housing;
10. Install the
transmission on the vehicle.
D riven shaft and governor
S pecial tool: KA-000-232 bearing
rem over
D isassembly procedure:
1. Remove the automatic
108
Automatic Transmission Fault Diagnosis Manual
aft
ring and
assembled
ool of KA-000-232 (bearing remover);