Checking Abs Warning Light; Reading Condition Information; Retrieving Fault Code; Clearing Fault Code - Chery A11 2003 Repair Manual

Chery

5.1 Checking ABS warning light

Check if ABS warning light is as following:
Ⅰ.When ignition turned ON, ABS goes on for about 1.7 senconds，then goes off。
Ⅱ. If ABS warning light is not as specified, a problem is indicated and the fault code must be retrived.
Ⅲ. If ABS warning light does not go on after igniton turned on, repair problem referring to FAULT W/O CODE
DIAGNOSTIC CHART.

5.2 Reading condition information

After turning on scan tool, enter 03 at ADDRESS, press Q , following data will be displayed：
1.Example，ECU No. and Version No.
1JO 907 379P ABS MK20I/E
2. Code (Codierung) ：×××××
3. Factory code (WSC) ：×××××
5.3 Retriving Fault Code
Enter 02 at FUNCTION SELECT, press Q, fault number will be displayed. Then press "→", fault code
and related information of each fault will be listed.

5.4 Clearing Fault Code

Enter 05 at FUNCTION SELECT, press Q, fault code will be cleared. If failed to clear the code, the fault is a hard
fault. If stored code can be cleared, it indicates an intermittent fault, which can be detected only during a vehicle drive
test.
5.5 Fault Code Display Method
No problem so far
(ABS warning light is off)
Still exist so far
(ABS warning light is on)
SQR7160 series sedan ABS system－fault diagnostic and repairing
5. MK20-I/E SYSTEM
System Problem
Never happened before
Happened sometime before
Never happened before
Happened sometime before
Displayed Code
No fault code
Intermittent code
Not intermittent code
Intermittent code AND
Not intermittent code
5