Chery A11 2003 Repair Manual page 127

Dismantlement, Disassembly and Assembly of
Shifting Shaft
When doing this, it is not necessary to disassemble
the transmission assy.
Dismantlement:
Put the assy. on the shelf or platform, with the gear at
neutral position. (the shifting shaft should be able to
move smoothly by arrow direction). Unscrew the
shifting fixing-seat assy.
Special tool
Unscrew the plug with special tool and take out
shifting shaft.
Dismantlement: Press spring-1 by arrow direction to
compress the spring inside. Keep it at the position until
snap ring-2 is removed.
Assembly: the procedures are reverse to the above.
Note: be sure that the fork system is at neutral position.
The torque of screw plug is 50Nm.
The torque of shifting shaft fixing-seat is 40Nm.
Dismantlement of clutch housing assy.
After changing the clutch housing, it is necessary to
readjust the output shaft and differential gear.
Dismantlement and assembly of needle roller shaft of
input shaft
Dismantlement:
Special tool
Flush down the needle roller bearing with special deift
punch.
Special tool
21