The manual of 4HP14 A/T removing and installing
CHERY AUTOMOBILE CO., LTD
1.3.3.2、Driven shaft clearence adjustment
Assembling requirements:
Install 1.75 mm thickness gasket and sub rear
output gear, and tighten bolt by hand.
To maintain the clearance, select the thickest
washer in alternative dimensions.
After Applying park gear, tighten sub rear output
gear locking bolts. Tighten torque is 30Nm.
Release the stop gear and repeat the procedures.
Install measuring instrument 5P 05 001 518 with
dial indicator as shown in fig.
-8-