Chery A11 2003 Repair Manual page 342

The manual of 4HP14 A/T removing and installing
Turn the gear to determine indicator reading.
Reading X
For example, X=0.46mm
Washer thickness S is calculated by following
formula:
S = 1.75mm (Xmm – 0.06mm)
For example
S = 1.75 (0.46 – 0.06)
S = 1.75 – 0.4
S=1.35mm
Therefore, 1.35mm washer is needed or other washer to replace 1.75mm washer.
If 1.35mm or other thickness washer is installed, the tighten torque (30Nm) should be made again.
Using appropriate tool, damp locking bolt flange
edge to distortion for locking.
-10-
S = Required washer thickness
1.75 = Maximun washer thickness provided in table.
X = Measured reading.
0.06 = Selected clearance (select range is from 0.05 to 0.10)
Measured readings X=0.46mm
CHERY AUTOMOBILE CO., LTD