Chery A11 2003 Repair Manual page 304

Maintenance Manual for Chery·Windcloud
15 Set ignition
commutator between ECU and wire harness to
check the voltages of output signal terminal,
ground terminal and 76#, 60# pins (served as
4.5-5V sensor power) of ECU throttle position
sensor to see if they are in good order.
16 Check if ignition coil, high voltage line and
spark plug are in good condition.
switch in "ON".
No
Connect Yes
No
Yes
No
Marelli EFI System
Replace fuel
pressure regulator
Go to next step
Repair or replace
wire harness
Replace ECU
Repair relevant
parts
53