Chery A11 2003 Repair Manual page 419

The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
As shown on right figure, install washer 09 022
and sub rear output rear onto driven shaft.
Tighten bolt 09 030.
NOTE:
The whole output gear mechanism needs
adjusting by procedures in section 1.4.2 in page
5/2.
Lubricating gasket 09 210 and then install it.
Install side cover 09 220, and tighten with 11
bolts.
Tool: 27# socket spanner
Torque: 10Nm
Turn differential by 180℃, and remove two
mounting carriers.
-87-