Chery A11 2003 Repair Manual page 537

CHERY AUTOMOBILE CO., LTD
4. Install clutch E assembly and
snap ring;
5. Put the adjusting washer on
input shaft:
6. Install th e clutch E assembly on
the transmission:
7.Install the assembled transmission
assembly on the vehicle.
O utput shaft and
o ne-way overrun clutch
Special tool:
KA-000-060 bearing remover
KA -000-232 bearing remover
KA -000-300 bearing r emover
D isassem bly procedure:
1. Remove the
transmission assembly from the
vehicle:
2. Remove the output shaft and 1
gear one-way overrun clutch
from the automatic transmission;
3. Remove the snap ring on the
output shaft;
4. Separate the output shaft from the
gear ring;
the
st
1 gear
automatic
st
Automatic Transmission Fault Diagnosis Manual
105