Abs (Anti-Lock Brake System) Control System; Introduction To Abs Control System; Disassembly/Assembly And Installation Of Abs Controller - Chery automobile Service Manual

The rear brake is an automatic adjusting intermittent
drum brake, so it is necessary to adjust the parking
brake under the normal use, and it is required to
adjust the brake only when replacing the parking
brake cable, brake shoe assy. or brake wheel
cylinder. Adjust it in accordance with the following
procedures:
-- Loosen the handle of parking brake.
-- Forcefully step on the brake pedal once.
-- Pull the handle of parking brake upwards 4
ratchets.
-- Tighten the adjusting nut until the two wheels isn't
available to be turned by hand, as shown in the
figure.
-- Unclip the parking brake, and check whether the
two rear wheels operate freely.

ABS (ANTI-LOCK BRAKE SYSTEM) CONTROL SYSTEM

INTRODUCTION TO ABS CONTROL SYSTEM

Chery's A15LHD series vehicle adopts the MK
series ABS system manufactured based on the
imported technology. The system is the current
newest generation of anti-lock brake system all
over the world, which has the EBD (Electronic
Brake Distribution) function, and it is unnecessary
to prepare for the brake proportion control valve.
This system has the following characteristics:
* Integrated module structure design
* Small dimension, light weight and low cost
* Security and reliable, easy to maintenance
* With the failure information storage and
self-diagnostics interfaces

DISASSEMBLY/ASSEMBLY AND INSTALLATION OF ABS CONTROLLER

P-19
Adjusting Nut
Adjusting Nut