Overview; Srx5400, Srx5600, And Srx5800 Firewall Card Overview - Juniper SRX5400 Reference

Firewall card reference
Hide thumbs Also See for SRX5400:
Table of Contents

Advertisement

CHAPTER 1

Overview

IN THIS CHAPTER

SRX5400, SRX5600, and SRX5800 Firewall Card Overview | 2

Cards Supported on SRX5400, SRX5600, and SRX5800 Firewalls | 3
SRX5400, SRX5600, and SRX5800 Firewall Card Overview
The cards described in this guide let you upgrade and customize your SRX5400, SRX5600, or SRX5800
Firewall to suit the needs of your network. The following types of cards are available for the SRX5400,
SRX5600, and SRX5800 Firewalls:
• I/O cards (IOCs) provide additional physical network connections to the firewall. Their primary
function is to deliver data packets arriving on the physical ports to the Services Processing Cards
(SPCs) and to forward data packets out the physical ports after services processing.
• Flex IOCs have two slots for port modules that add additional physical network connections to the
firewall. Like IOCs, their primary function is to deliver data packets arriving on the physical ports to
the SPCs and to forward data packets out the physical ports after services processing.
• Modular Port Concentrators (MPCs) have slots on the front panel that accept smaller cards called
Modular Interface Cards (MICs). Each MIC has one or more physical interfaces on it. An MPC with
MICs installed functions in the same way as a regular I/O card (IOC), but allows greater flexibility in
adding different types of Ethernet ports to your firewall. MPCs and MICs are similar in form and
function to Flex IOCs and port modules. However, the two use different form-factors, so you cannot
install port modules in an MPC, nor can you install MICs in a Flex IOC.
• Services Processing Cards (SPCs) provide the processing power to run integrated services such as
firewall, IPsec and IDP. All traffic traversing the firewall is passed to an SPC to have services
processing applied to it.
• Switch Control Boards (SCBs) power on and power off IOCs and SPCs; control clocking and system
resets; and control booting, monitor, and system functions. Each SCB has a slot in the front panel for
a Routing Engine.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx5600Srx5800

Table of Contents