MK_Emergency_Over_Wait
Phaser 7500 Printer Service Manual
MK internal mismatch (panel creation is obstructed continuously over the
predetermined time).
Applicable Chain-Link Code
045-350: MK_Emergency_Over_Wait
•
Initial Actions
•
Power cycle the printer.
•
If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
MCU PWB, PL18.3.6
■
1. Turn the power Off and On.
2. Restore NVRAM. If the problem persists, replace the MCU PWB (REP 18.12,
page
8-202).
Error Messages and Codes
Wiring and Plug/Jack Map References
3-139