Operation C Drum End Of Life - Xerox Phaser 7500 Service Manual

Error Messages and Codes

Operation C Drum End of Life

Applicable Chain-Link Code
Initial Actions
3-88
During color printing, it was detected that printing cannot be continued because
of Cyan Imaging Unit Life End. Or, color printing was specified when printing
cannot be continued because of Cyan Imaging Unit Life End.
024-941: Drum Cartridge C Life End
•
• Check the Imaging Unit life.
• If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
Imaging Unit, PL8.1.4
■
1. Replace the Imaging Unit (C) (REP 1.2,
2. If the problem still persists, perform the
Wiring and Plug/Jack Map References
page 8-10).
"IOT System Fail" on page
Phaser 7500 Printer Service Manual
3-27.