Cover; Rep 19.1 Front Cover Assembly/ Inner Cover Assembly - Xerox Phaser 7500 Service Manual

Cover

REP 19.1 Front Cover Assembly/ Inner Cover Assembly

PL19.1.10/ PL19.1.13
Phaser 7500 Printer Service Manual
Caution
Do not expose the Imaging Unit to light for more than 5 minutes. Cover the
Imaging Unit to avoid damage. Do not touch the surface of the Imaging Unit.
Note
When removing the Deve or Dispenser inside the printer, remove the Front
Cover Assembly and the Inner Cover Assembly at the same time.
1. Remove the Imaging Unit (Y/M/C/K) (REP 1.2,
2. Remove the Toner Cartridge (Y/M/C/K) (REP 1.1,
3. Remove the Waste Cartridge (REP 1.3,
4. Remove the IBT Belt Cleaner Assembly (REP 6.1,
5. Remove 2 screws (silver, 8mm) that secure the Imaging Unit Cover.
6. Open the Imaging Unit Cover, part way to first detent, and pull it towards you
to remove it.
7. Remove 1 screw deeply recessed (silver, 8mm) that secures the Tension Lever
and remove the Tension Lever.
Tension Lever
Service Parts Disassembly
page 8-10).
page 8-9).
page 8-12).
page 8-57).
Imaging Cover
s7500-263
8-207