Rep 18.7 Main Lvps - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Service Parts Disassembly

REP 18.7 Main LVPS

To prevent electric shock, turn Off the power and unplug the power plug from

the electrical outlet.

PWB's can be damaged by an electrostatic discharge. Observe all ESD

procedures to avoid component damage.

1. Remove the Waste Cartridge (REP 1.3,

2. Remove the Right Cover (REP 19.8,

3. Remove the Bottle Guide Assembly (REP 8.4,

4. Disconnect all wiring harness connectors that are connected to the Main LVPS.

5. Remove the wiring harness from the 5 clamps under the Main LVPS.

6. Remove 4 screws (silver, 6mm) that secure the Main LVPS to the printer and

remove the Main LVPS.

Replacement Note

Be sure to align the 2 hooks on the printer frame with the hole on the LVPS

Frame when installing the Main LVPS.

Phaser 7500 Printer Service Manual