General Information
Maintenance Function
Firmware Update
Diagnostics
1-26
The Image Processor Board firmware can be updated by customers and service
technicians using Windows PC or Macintosh with dedicated utilities. Firmware
updates are available at www.xerox.com/office/P7500support.
Updated Firmware
Image Processor Board
MCU Board
Note
Refer to
"Firmware Update" on page 11-14
Two types of diagnostic functions are available:
1. Power On Self Test: The controller board is checked at every Power On. The
CPU, ROM, and RAM are verified by the boot loader for integrity before the
POST firmware can be loaded to verify the Controller Board, but other system
components are not required for POST to run.
2. Service Diagnostics: Only qualified service personnel can perform manual
diagnostics using the Service Mode in the Control Panel (refer to
Troubleshooting" on page
Via Network (port 9100)
Available
Available
for detailed procedure.
4-1).
Phaser 7500 Printer Service Manual
"General