Xerox Phaser 7500 Service Manual page 559

Hide thumbs Also See for Phaser 7500:

Table of Contents

Phaser 7500 Printer Service Manual

Be sure to pull the cleaning rod out as far as it can come out. Also push the

cleaning rod in as far as it will go. Do not use excessive force when pulling the

cleaning rod.

4. Pull the Cleaning Rod from the lower right corner of the Imaging Unit slot.

5. Continue to pull the Cleaning Rod until it stops, and move it all the way in and

out two to three times to clean the LED Scanner.

6. Repeat this step for all four Image Units.

7. Close the Imaging Unit Cover.

Cleaning and Maintenance

Troubleshooting