Rep 8.11 Sensor Bracket Assembly - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Service Parts Disassembly

REP 8.11 Sensor Bracket Assembly

1. Remove the PWB Chassis Unit (REP 18.10,

2. Disconnect the 2 wiring harness connectors that are connected to the Sensor

Bracket Assembly and the Agitator Motor Assembly.

3. Remove the wiring harness from the Sensor Bracket Assembly.

4. Remove 2 screws (silver, 6mm) that secure the Sensor Bracket Assembly and

remove the Sensor Bracket Assembly.

Phaser 7500 Printer Service Manual