REP 18.4 HVPS (Deve/ BCR)
PL18.1.7
Phaser 7500 Printer Service Manual
Caution
PWB's can be damaged by an electrostatic discharge. Observe all ESD
procedures to avoid component damage.
1. Remove the Waste Cartridge (REP 1.3,
2. Remove the Right Cover (REP 19.8,
3. Remove the Bottle Guide Assembly (REP 8.4,
4. Disconnect the wiring harness connector that is connected to the HVPS (Deve/
BCR).
5. Remove 2 screws (silver, 6mm) that secure the HVPS (Deve/ BCR) to the
printer.
Caution
Be careful not to bend the PWB when removing the PWB to prevent damaging
the PWB.
6. Hold onto the Bracket tabs of the HVPS (Deve/ BCR) and pull it out towards
you to remove the HVPS (Deve/ BCR).
Service Parts Disassembly
page
8-12).
page
8-219).
page
8-73).
P/J460
s7500-247
8-191