Rep 4.3 Hv Fan - Xerox Phaser 7500 Service Manual

Service Parts Disassembly

REP 4.3 HV Fan

PL4.3.1
8-40
1. Remove the PWB Chassis Unit (REP 18.10,
2. Remove 2 screws that secure the Bottom Fan Assembly (PL4.3.6).
3. Disconnect the wiring harness connector and remove the Fan.
Note
Because the GFI Chassis is to be removed with the harness still connected, do
not apply excessive force when performing the next step.
4. Remove 2 screws (silver, 6mm) that secure the GFI Chassis and remove the
GFI Chassis.
5. Remove 2 screws (silver, 6mm) that secure the Bracket, release the harness
from the 3 clamps, and remove the Bracket.
6. Disconnect the wiring harness connector that is connected to the Duct
Assembly.
GFI Chassis Assembly
page 8-197).
Rear Bottom Duct Assembly
Bracket
Phaser 7500 Printer Service Manual
s7500-482
s7500-094