Service Parts Disassembly
Tray 1 (MPT)
REP 13.1 Tray 1 Feeder Assembly
PL13.1.1
8-130
1. Remove the Top Rear Cover and the Rear Cover (REP 19.6,
2. Remove the Left Rear Cover (REP 19.4,
3. Open the Left Hand Cover Assembly.
4. Remove the wiring harness that is connected to the Tray 1 Feeder Assembly
from the 4 clamps.
5. Disconnect the wiring harness connector that is connected to the Tray 1
Feeder Assembly.
6. Close the Left Hand Cover Assembly (Door A).
7. Remove 2 screws (silver, 8mm) that secure the Tray 1 Feeder Assembly to the
printer and remove the Tray 1 Feeder Assembly.
page
8-217).
page
8-215).
Phaser 7500 Printer Service Manual
s7500-191