Rep 8.4 Bottle Guide Assembly - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

REP 8.4 Bottle Guide Assembly

Phaser 7500 Printer Service Manual

1. Remove the Waste Cartridge (REP 1.3,

2. Remove the Right Cover (REP 19.8,

3. Remove 4 screws (silver, 6mm) that secure the T-shaped Frame to the printer

and remove the T-shaped Frame.

4. Disconnect the wiring harness connectors that are connected to the 2 sensors

and remove the cable.

5. Release the wiring harness Clamp from the Bottle Guide Assembly.

6. Remove 4 screws (silver, 6mm) that secure the Bottle Guide Assembly to the

printer and remove the Bottle Guide Assembly.

Bottle Guide Assy

Service Parts Disassembly