Rep 13.8 Tray 1 Feed Out Sensor - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

REP 13.8 Tray 1 Feed Out Sensor

Phaser 7500 Printer Service Manual

1. Remove the Tray 1 Feeder Assembly (REP 13.1,

2. Use a flat tip screwdriver to release the hook of the Sensor Plate that is

located under the Tray 1 Feeder Assembly, and remove the Sensor Plate.

3. Disconnect the wiring harness connector that is connected to the Tray 1 Feed

4. Release the 3 hooks that secure the Tray 1 Feed Out Sensor and remove the

Tray 1 Feed Out Sensor.

Service Parts Disassembly