Rep 14.8 Retract Shaft Assembly - Xerox Phaser 7500 Service Manual

REP 14.8 Retract Shaft Assembly

PL14.4.4
Phaser 7500 Printer Service Manual
Caution
Do not touch the Roll surface of the 2nd BTR Assembly.
1. Remove the 2nd BTR Assembly (REP 14.2,
Note
When removing the screws in the following step, be careful not to loose the
spring.
2. Remove 4 screws (silver, 4mm) that secure the 2nd BTR Housing Assembly to
the 2nd Link Assembly.
3. Remove 2 screws (silver, 6mm) that secure the Front Bracket to the Left Hand
Cover Assembly and remove the 2 Brackets together with the 2nd BTR
Housing Assembly.
4. Remove the Rear Bracket.
B
page 8-147).
Brackets
A
Service Parts Disassembly
A
B
s7500-216
8-153