Adjustments and Calibrations
RegiCon Calibration
Procedure
6-8
The RegiCon Calibration allows the users to adjust the RegiCon value.
Caution
The functions of the menus described here have great effect on the print
quality and operation of the machine. In addition, they include the
adjustment functions used at shipment, so do not change the settings unless
specified otherwise in this manual.
1. Enter Service Diagnostics
2. Scroll down the menu and select Adjustments/ Calibrations. Press OK.
3. Select RegiCon Calibration and press OK.
4. The printer starts processing with a Starting Calibration... message appears.
5. When the process is complete, the Calibration Results screen is displayed.
Note
There is no result display on the screen.
(page
4-9).
Phaser 7500 Printer Service Manual