Rep 8.9 Gear Bracket Assembly - Xerox Phaser 7500 Service Manual

Service Parts Disassembly

REP 8.9 Gear Bracket Assembly

PL8.2.9
8-78
1. Remove the ATC Sensor PWB (REP 5.6,
2. Remove the Waste Toner Pipe Assembly (REP 8.6,
3. Remove the Main LVPS (REP 18.7,
4. Release the one tab hook of the Harness Holder and rotate the Holder
clockwise to remove it.
5. Remove 2 screws (silver, 6mm) that secure the Gear Bracket Assembly.
6. Remove the KL Clip at the rear of the Gear Bracket Assembly and the E- Clip
that secures the Gear.
7. Pull the Gear Bracket Assembly towards the front to remove it and remove the
2 Gears from the rear.
Replacement Note
The HVPS cable is positioned behind the shaft.
page 8-52).
page 8-75).
page 8-194).
Phaser 7500 Printer Service Manual
s7500-131
s7500-132