Service Parts Disassembly
REP 10.2 Tray 3/4/5 Paper Size Sensor
PL10.1.8/ PL10.1.9/ PL10.1.10
8-92
1. Remove the Tray Assembly from the Tray Module (3T).
2. Disconnect the wiring harness connector P/J101 that is connected to the
Paper Size Sensor.
3. Remove 1 screw (silver, 8mm) that secures the Paper Size Sensor to the Tray
Module (3T).
4. Remove the Paper Size Sensor from the hooks at the installation section.
Paper Size Sensor
Phaser 7500 Printer Service Manual
s7500-156