1500-Sheet Feeder (Option); Rep 10.1 Tray 3/4/5 Feeder Assembly/ Feed Out Chute - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Service Parts Disassembly

1500-Sheet Feeder (Option)

PL10.1.1/ PL10.1.2/ PL10.1.3

1. Remove the Tray Assembly from the Tray Module (3T).

2. Slide the inner upper (when seen from the Tray Assembly insertion opening)

Chute towards the rear until it stops.

3. Release the clamp that secures the wiring harness that is connected to the

Feeder Assembly and disconnect the wiring harness connectors (P/J661, P/

4. Remove 2 screws (silver, 8mm) that secure the Feeder Assembly to the Tray

Module (3T).

5. Pull out the front side of the Feeder Assembly towards you to remove the

Feeder Assembly from the Tray Module (3T).

Phaser 7500 Printer Service Manual