Rep 6.2 Ibt Belt Unit/ Front Lock Bracket/ Rear Lock Bracket/ Tension Lever - Xerox Phaser 7500 Service Manual

Service Parts Disassembly
REP 6.2 IBT Belt Unit/ Front Lock Bracket/ Rear Lock Bracket/ Tension
Lever
PL6.1.1/ PL6.1.2/ PL6.1.3/ PL6.1.10
8-58
Caution
Do not expose the Imaging Unit to light for more than 5 minutes. Cover the
Imaging Unit to avoid damage. Do not touch the surface of the Imaging Unit.
Do not touch the IBT Belt surface.
1. Remove the Imaging Unit (Y/M/C/K) (REP 1.2,
2. Remove the IBT Belt Cleaner Assembly (REP 6.1,
3. Remove the KL Clip that secures the Rear Strap at the rear, and remove the
Rear Strap from the L/H Cover Assembly.
4. Use a needle-nose plier to turn the Left Hand Door Support strap at the front
counterclockwise by 90° and pull it towards you. Turn it back at the inner
stopper position, then incline the L/H Cover Assembly horizontally until it
stops.
page 8-10).
page 8-57).
Phaser 7500 Printer Service Manual
s7500-110