Rep 11.2 Tray 3 Paper Size Sensor - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Service Parts Disassembly

REP 11.2 Tray 3 Paper Size Sensor

1. Remove the Tray Assembly from the Tray Module (1T).

2. Disconnect the wiring harness connector P/J101 that is connected to the Tray

3 Paper Size Sensor.

3. Remove 1 screw (silver, 8mm) that secures the Tray 3 Paper Size Sensor to the

Tray Module (1T).

4. Remove the Tray 3 Paper Size Sensor from the hooks at the installation area.

Tray 3 Paper Size Sensor

Phaser 7500 Printer Service Manual