Delta AS Series Programming Manual page 928

ASCII mode
You do not need to convert the ASCII codes, and they are all expressed in 16# values.

AS sends the communication command: "：01 06 06 00 55 AA F4 CR LF"

AS receives the communication command: "：01 06 06 00 55 AA F4 CR LF"
RTU mode

AS sends the communication command: "01 06 06 00 55 AA 36 6D"

AS receives the communication command: "01 06 06 00 55 AA 36 6D"
If the format is correct, SM100 is ON.
4. After receiving the data from the DVP-ES2, the PLC confirms the data format sent back from the DVP-ES2 and
determines if it is correct. If no error occurs in the format, the corresponding special flags SM100 are ON; if not
SM102 is ON.
5. When the DVP-ES2 receives this instruction, it writes the data stored in the device D10 to the device T0 in the
DVP-ES2.
6. Since this function code writes data, the operand n is ignored.
Cha p ter 6 App l ied Ins truc tio ns
6_
6 - 6 4 9