Delta AS Series Programming Manual page 447

AS Ser ies Pro gra mm in g M anu al
Interrupt
number
High-speed output interrupt 10: the position planning table
I519 instruction completes
I601 Timer interrupts 1 (unit 1ms)
I602 Timer interrupts 1 (unit 1ms)
I603 Timer interrupts 1 (unit 1ms)
I604 Timer interrupts 1 (unit 0.1ms)
Note: When several interrupts occur simultaneously, the interrupt task whose pointer number is smallest is executed
first. The PLC completes the on-going interrupt, and then execute other interrupts according to their pointer numbers.
For example, during the execution of I400 interrupt, if I500 and I300 occur simultaneously, the PLC executes the I300
interrupt (smaller pointer number) after executing the I400 interrupt.
_6
6 - 1 6 8
Description
Mask-able interrupts
Bit No.
SR
SR632
9
0
1
2
3