Delta AS Series Programming Manual page 871

AS Ser ies Pro gra mm in g M anu al
6. When using on-line editing, reset the conditional contact to initialize the instruction.
Example 1
When X0.0 is ON, the instruction timer starts to count. When the time for which X0.0 has been ON reaches 100 hours,
Y0.0 is ON. The current time is recorded in D0, and the current time which is less than one hour is recorded in D1. D2 is
for system use. The value in it cannot be altered; otherwise, an error occurs.
Additional remarks
1.
When S is less than or equal to 0, the instruction is not executed, and the state of the output device is unchanged.
2.
If the value in D
3.
If D +2 exceeds the device range, an operation error occurs, the instruction is not executed, SM0 is ON, and the
1
_6
error code in SR0 is 16#2003.
4.
If you declare the operand D
6 - 5 9 2
is less than 0, the state of the output device is unchanged.
1
in ISPSoft, the data type is ARRAY [3] of WORD/INT.
1