Delta AS Series Programming Manual page 1349

A S S e r i e s P r o g r a m m i n g M a n u a l
Error
Code
(16#)
modules.
140D More than 32 extension modules.
More than eight remote modules on
140E
the right side of the CPU module.
The extension module ID exceeds
1600
the range.
The extension module ID cannot be
1601
set.
The extension module ID is
1602
duplicated.
The extension module cannot be
1603
operated.
Extension module communication
1604
timeout
1605 Hardware failure
Errors on the settings of the
1606 communication module function
_7
card
1607 The external voltage is abnormal.
The Internal factory calibration or
1608
the CJC is abnormal.
1609
- Reserved (Error codes for the extension modules)
160F
200A Invalid instruction
The number of MODBUS TCP
6010
connections exceeds the range.
The number of EtherNet/IP
6011
connections exceeds the range.
C000
The PLC program syntax is
-
incorrect.
CFFF
7 - 8
Description
Check the total number of extension modules (maximum
is 32).
Check the total number of remote modules on the right
side of the CPU module (maximum is 8).
1. Make sure the module is properly connected to the
2. If the problem persists, contact the local authorized
1. Make sure the module is properly connected to the
2. If the problem persists, contact the local authorized
1. Make sure the module is properly connected to the
2. If the problem persists, contact the local authorized
1. Make sure the module is properly connected to the
2. If the problem persists, contact the local authorized
1. Make sure the module is properly connected to the
2. If the problem persists, contact the local authorized
If the problem persists, contact the local authorized
distributors.
Make sure the function card is properly connected to the
CPU module and turn the modules on again.
Check if the external 24 V power supply to the module is
normal.
If the problem persists, contact the local authorized
distributors.
Check the position where an error occurs and modify the
program. Compile the program and download the
program again.
Check the number of superior devices (maximum is 32).
Check the number of connections (maximum is 16).
Save the PLC program and contact your distributor.
Solution
(maximum is four).
CPU module and turn the modules on again.
distributors.
CPU module and turn the modules on again.
distributors.
CPU module and turn the modules on again.
distributors.
CPU module and turn the modules on again.
distributors.
CPU module and turn the modules on again.
distributors.
Flag Log
SM10 V
SM30 V
SM10 V
SM10 V
SM10 V
SM10 V
SM10 V
SM10 V
SM10 V
SM10 V
SM10 V
SM5 V
SM
V
1092
SM
V
1093
- V