Delta AS Series Programming Manual page 1228

Cha p ter 6 App l ied Ins truc tio ns
6_
When the PLC runs the program and M1 is ON, the PLC starts drawing the first segment of the arc. D1
increments by one when a segment of arc is completed and the second segment of the arc starts to
automatically execute. This operation pattern repeats until the fourth segment of arc is completed.
When D1=1, using DCICR, the PLC draws the first-segment arc from P1 to P2 with the shift of the center of the
circle: 18825 and arc resolution: 5.
When D1=2, using DCICR, the PLC draws the second-segment arc from P2 to P3 with the shift of the center of the
circle: 110295 and arc resolution: 5.
When D1=3, using DCICR, the PLC draws the third-segment arc from P3 to P4 with the shift of the center of the
circle: 18825 and arc resolution: 5.
When D1=4, using DCICR, PLC draws the fourth-segment arc from P4 to P1 with the shift of the center of the circle:
110295 and arc resolution: 5.
6 - 9 4 9