Delta AS Series Programming Manual page 1012

Example
When X0.0 is ON, the MOV instruction sets the value in D0 is set to 0, and the EPUSH instruction transmits the values in
E0–E9 to D1–D10. After the execution of FB0 is complete, the EPOP instruction reads the values in D1–D9 into E0–E9.
Additional remarks
1. If the value in D is not in the range 0–100, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#2003.
2. If the range of device is not sufficient for D+((the value in D) *16-1), the instruction is not executed, SM0 is ON, and
the error code in SR0 is 16#2003.
Ch ap te r 6 Ap pl ie d Instruc ti ons
6_
6 - 7 3 3