Delta AS Series Programming Manual page 440

Example:

Set up the timed I601 interrupt task to 500ms in HWCONFIG in ISPSoft.

When the PLC runs the program Cyclic_0, it scans the EI instruction, enables interrupt tasks, and then executes
the I601 interrupt task. When the interrupt task execution is complete, the main program is executed.

When M0 is ON, the I601 timer interrupt task is disabled.

When M1 is ON, the I601 timer interrupt task is enabled.

When M2 is ON, the SR632 is 0 and the I601 timer interrupt task is disabled.

When M3 is ON, the SR632 is 1 and the I601 timer interrupt task is enabled.
The program Cyclic_0:
The interrupt task:
Ch ap te r 6 App l ied Ins tr uc ti ons
6_
6 - 1 6 1