Delta AS Series Programming Manual page 1297

AS Ser ies Pro gra mm in g M anu al
Example 2 (communication with Delta inverters)
1. When M0 changes from OFF to ON, this instruction starts to initialize the station address 21. When SM1683 is ON, it
indicates the initialization is complete.
2. When M1 changes from OFF to ON, this instruction starts to set the acceleration time and deceleration time at the
station address 21.
3. When M2 changes from OFF to ON, this instruction starts to set the control mode at the station address 21.
4. When M3 changes from OFF to ON, the inverter moves at 2500rpm until M3 goes OFF.
_6
6 - 1 0 1 8