_________________________________________________________________
10.5
FINAL CONFIGURATION ITEMS
10.5.1 Aircraft Registration Number Entry
1. Select the GTX page group, then select the TRANSPONDER CONFIGURATION page using the
small FMS knob on the PFD.
2. Ensure that the 'ADDRESS TYPE' is 'US TAIL' under the 'SET' and 'ACTIVE' columns.
3. Activate the cursor and highlight the 'ADDRESS' field. Use the small/large FMS knobs to enter
the aircraft registration number.
4. Once the correct registration number is entered, press the ENT key. The transponder is
configured:
5. The transponder then alerts the technician of complete configuration:
6. Press the ENT key on the PFD and deactivate the cursor.
Page 10-6
Rev. B
G1000 System Maintenance Manual
190-00907-00