Garmin G1000 Maintenance Manual page 193

_________________________________________________________________
11. Monitor the status of the upload. When the upload is finished, press the ENT key to
acknowledge the following confirmation:
12. View the SUMMARY field and ensure that all items are 'complete'.
13. De-activate the cursor.
14. Cycle power to the PFD and MFD to reboot the system.
15. Verify that the MAP – TERRAIN PROXIMITY page on the MFD has been renamed as the MAP
– TAWS page.
Due to time required for the GIA to exit configuration mode, power must be cycled to
the PFD and MFD following the first bootup in normal mode (after exiting
configuration mode). Failure to do so may result in an erroneous 'TAWS FAIL'
message.
16. Cycle power again to the PFD and MFD to reboot the system.
17. Verify the unit successfully passes TAWS self test.
G1000 System Maintenance Manual
190-00907-00
NOTE
Page 10-11
Rev. B