Garmin G1000 Maintenance Manual page 131

_________________________________________________________________
11. Press the ENT key to select the SYSTEM, MANIFEST, MFD, and PFD configuration box.
12. Press the LOAD softkey.
13. View the SUMMARY field and ensure that the load is complete, then de-activate the cursor.
14. After the software and configuration files are loaded, turn off the system. Turn the system
back on and load the screenshot file (if present on loader card for aircraft type) by following
the screen prompts. If the screenshot is not present, you will not receive a prompt to load
the screenshot file.
15. Turn the system off and remove the software loader card. Proceed to the Options Loading
section to install/unlock optional features such as DME, ADF and TAWS.
16. Load the Jeppesen Aviation database File. It must be the same version that is in the other
display.
17. Reinsert the Supplemental Database Cards in the bottom slot of each display. Be sure to
insert the card removed from the MFD back into the MFD.
18. Continue to the PFD/MFD Test procedure.
G1000 System Maintenance Manual
190-00907-00
Page 7-5
Rev. B