Garmin G1000 Maintenance Manual page 168

_________________________________________________________________
4. Activate the cursor and use the small FMS knob to highlight 'Enable <feature>' in the FILE
field.
5. Press the ENT key to select the Enable option. Once the option is selected the
configuration files in the SECTION field will be displayed.
6. Press the LOAD ALL softkey.
7. Select YES and press ENT to acknowledge the following prompt:
8. Monitor the status of the upload. When the upload is finished, press the ENT key to
acknowledge the following confirmation:
9. View the SUMMARY field and ensure that the item is 'COMPLETE':
10. De-activate the cursor.
11. Power down the system and remove the Unlock card from the PFD.
Page 7-42
Rev. B
G1000 System Maintenance Manual
190-00907-00