Garmin G1000 Maintenance Manual page 129

_________________________________________________________________
Remove Supplemental Database Cards from the lower slot of all displays
before loading software into any unit. Not removing the cards may corrupt
them during the software upload. Replacing corrupted database cards are not
covered under warranty.
•
Garmin recommends the use of Sandisk SD cards for loading software
and configuration files. Use of other brand cards is not recommended.
•
Refer to the OEM Maintenance Manual for approved software versions
and part numbers.
•
Determine what optional equipment (i.e. ADF, DME, Oxygen, Autopilot,
etc.) is installed in the aircraft before loading software.
equipment configuration files will need to be reloaded after an LRU
replacement to reenable them. Failure to load configuration files for optional
equipment will prevent them from working properly with the G1000 system.
•
Determine what optional features (i.e. SAR, TAWS, Synthetic Vision
(SVT), Jeppesen ChartView, etc.) are installed before loading the
AIRFRAME configuration file. If the AIRFRAME configuration file is loaded
from the system software card, you will need to unlock the optional features
using their unlock cards.
features will prevent them from working.
G1000 System Maintenance Manual
190-00907-00
CAUTION
NOTES
Failure to load configuration files for optional
Optional
Page 7-3
Rev. B