Garmin G1000 Maintenance Manual page 170

_________________________________________________________________
Ensure that the base airframe configuration option is selected and loaded first
after a software upload, LRU replacement, or optional system installation. The
optional system configuration file will be overwritten by the base airframe
configuration file if the optional system configuration file is loaded first.
1. Remove the Supplemental Database cards from the bottom slots of each display. Note
which card was removed from the MFD so it may be identified later for reinsertion in the
MFD when software and configuration loading is complete. It contains a FliteChart or
ChartView database which is only used by the MFD.
2. Insert the correct airframe software loader card into the top slot of the PFD.
3. Apply system power and place both displays in Configuration Mode.
4. On the PFD, press the NO softkey at "DO YOU WANT TO UPDATE SYSTEM FILES?"
prompt.
5. After the SYSTEM STATUS page appears on the PFD, use the small FMS knob to turn to
the SYSTEM UPLOAD page.
6. Activate the cursor and turn the small FMS knob to highlight the appropriate airframe or
Options file.
7. Press the ENT key.
8. Turn the small FMS knob and highlight the appropriate installation option in the FILE field.
Page 7-44
Rev. B
NOTE
G1000 System Maintenance Manual
190-00907-00