Garmin G1000 Maintenance Manual page 5

______________________________________________________________
This manual reflects the operation and configuration of GDU v9.0x.
The following are General Safety Precautions that are not related to any specific procedure and
therefore do not appear elsewhere in this maintenance manual. These are recommended
precautions that personnel should understand and apply during the many phases of maintenance
and repair.
KEEP AWAY FROM LIVE CIRCUITS. Maintenance personnel shall observe all safety
regulations at all times. Turn off system power before making or breaking electrical connections.
Regard any exposed connector, terminal board, or circuit board as a possible shock hazard.
Components which retain a charge shall be discharged only when such grounding does not result
in equipment damage. If a test connection to energized equipment is required, make the test
equipment ground connection before probing the voltage or signal to be tested.
DO NOT SERVICE ALONE. Personnel shall not under any circumstances reach into or enter
any enclosure for the purpose of servicing or adjusting the equipment without immediate
presence or assistance of another person capable of rendering aid.
INFORMATION SUBJECT TO EXPORT CONTROL LAWS
"This document may contain information which is subject to the Export Administration
Regulations ("EAR") issued by the United States Department of Commerce (15 CFR, Chapter
VII Subchapter C) and which may not be exported, released or disclosed to foreign nationals
inside or outside the United States without first obtaining an export license. The preceding
statement is required to be included on any and all reproductions in whole or in part of this
manual."
G1000 System Maintenance Manual Page i
190-00907-00 Rev. B