Garmin G1000 Maintenance Manual page 187

_________________________________________________________________
Ensure that the base airframe configuration option is selected and loaded first after a
software upload, LRU replacement, or optional system installation. The optional
system configuration (detailed below) will be overwritten by the base airframe
configuration if the optional system configuration is completed first.
1. Insert the proper G1000 loader card into the top card slot of the PFD.
2. Press and hold the ENT key on PFD while applying power.
3. When the words 'INITIALIZING SYSTEM' appear in the upper left corner of the PFD, release
the ENT key.
4. Turn the MFD on in the same manner.
5. Select the SYSTEM UPLOAD page on the PFD.
6. Highlight the appropriate air frame.
7. Press the ENT key.
8. Highlight the appropriate installation option in the FILE field.
9. Press the ENT key.
10. Press the LOAD softkey.
11. When the upload is complete, press the ENT key to confirm.
G1000 System Maintenance Manual
190-00907-00
NOTE
Page 10-5
Rev. B