Filling A Barrel; Run The Barrel Motor; Rinsing A Barrel - Cornelius VIPER E 2 FLAVOR Manual

Viper Installation, Service & Decommissioning Manual

Filling a Barrel

Step
1
2
3
4
5
NOTE: When FILL button is pressed, it changes to a STOP button.

Run the Barrel Motor

Step
1
2
3
4
NOTE: When RUN button is pressed, it changes to a STOP button.

Rinsing a Barrel

When rinsing a barrel, the Barrel Maintenance menu cannot be used. The procedure must be done manually, as described in
Table 48.
Step
1
2
3
4
5
6
Publication Number: 620073146SER
Action
From the Select menu (), open the Barrel Maintenance
Fill a barrel
menu, shown in Figure 51.
Use the Up and Down arrows to highlight the desired
Select the barrel
barrel
Press the FILL button at the bottom of the display to fill
Select Fill function
the highlighted barrel
When the fill completes, intermittently open and close
Finish filling the barrel
the relief valve to bleed CO
Press the STOP button at the bottom of the display to
Complete the procedure stop the fill. Press the BACK button to return to the
Select menu.
Action
From the Setup menu (), open the Barrel Maintenance
Run a barrel
menu, shown in Figure 51.
Use the Up and Down arrows to highlight the desired
Select the barrel
barrel
Press the SPIN button at the bottom of the display to
Select Run function
start the motor in the highlighted barrel
Press the STOP button at the bottom of the display to
Stop the procedure stop the motor. Press the BACK button to return to the
Select menu.
Action
If the barrel has liquid in it, use the Purge procedure in
Empty a barrel
Table 45 to empty the barrel.
Rinse a barrel Go to the Barrel Status menu, Figure 39.
Use the Up and Down arrows to highlight the desired
Select the barrel
barrel
Press the OFF button at the bottom of the display to
Turn off the barrel
turn off the barrel.
Press the manual bypass on the water solenoid and fill
the barrel with plain water. Use the relief valve on the
Override Water Solenoid
faceplate of the barrel to relieve pressure and com-
pletely fill the barrel.
Run the barrel motor Use the procedure in Table 47 to run the barrel.
- 66 -
Table 46.
Procedure
from the barrel.
2
Table 47.
Procedure
Table 48.
Procedure
© 2022, Marmon Foodservice Technologies Inc.