Setting The System Options - Cornelius VIPER E 2 FLAVOR Manual

Viper Installation, Service & Decommissioning Manual
From this screen, all the other screens may be accessed. The following procedures are required for initial setup of the unit.
• Set the Options
• Set the Clock
• Set the Sleep and Wake Times
• Set the Viscosity

Setting the System Options

The first items that should be set are the formatting options. These formatting options are located in the Option Setup menu. To access
the Option Setup menu, press the MENU button on the Barrel Status menu. This displays the MAIN menu, shown in Figure 18. Then press
the SETUP button to display the Option Setup menu, shown in Figure 19.
.
Use the up and down arrows on the right side of the control panel to move between the various choices on the display. When the
OPTION SETUP selection is highlighted, press the GO button to access the menu. The Option Setup menu (Figure 19.) is displayed.
Publication Number: 620073146SER
Figure 17.
Figure 18.
Figure 19.
- 22 - © 2022, Marmon Foodservice Technologies Inc.